Impeller Applications Charts • Magnum Pumps • Specialty Impellers
Yamaha
Impellers
 155 SWIRL |
 144 SUPER SLIM LINE |
 155XL SWIRL |
 "R" STYLE 155XL SWIRL |
Newer watercraft create so much horsepower, Yamaha increased the diameter of the drive shaft.
Skat-Trak manufactures impellers for a wide variety of water craft makes and models beyond those shown above. Please consult the list below for those recommended for your craft.
Yamaha Nozzles, Tail Cones and Shafts
| ITEM | DESCRIPTION |
| PRNYAM40 | Yamaha 140mm Venturi Nozzle machined to requested mm |
|
PRNYAM44
|
Yamaha 144mm Venturi Nozzle machined to requested mm |
| PRNYAM48 | Yamaha 148mm Venturi Nozzle with 2 rings |
| PRNYAM55 | Yamaha 155mm Venturi Nozzle with 2 rings |
|
PRNRING80 thru 88
|
Nozzle Ring 80mm, 81mm, 82mm, 83mm, 84mm, 85mm, 86mm, 87mm, 88mm |
| PRTCYAM275 | Yamaha Tail-cone 2.75" |
| PRTCYAM35 | Yamaha Tail-cone 3.5" |
| PRTCYAM4 | Yamaha Tail-cone 4" |
| PRSGYAMSJ | Yamaha Super Jet Scoop Grate - Stainless Steel |
| PRYAMDSC75 | Yamaha Super Jet C-75 Extended Drive Shaft |
|
PRYAMDSC75T
|
Yamaha Super Jet C-75 Titanium Extended Drive Shaft |
|
PRYAMDSXL
|
Yamaha XL Extended Drive Shaft |
|
PRYAMDSXLT
|
Yamaha XL Titanium Extended Drive Shaft
|
The Skat-Trak Yamaha GP 1200R Complete Nozzle Kit comes with a cast aluminum Venturi Nozzle, a stainless steel Trim Ring, and a cast aluminum Steering Nozzle. These Nozzles are available in 3 different set ups:
This Nozzle Kit is currently only available in a 2 degree wedge position. Cast from 356 Aluminum and powder coated, these superior nozzles come with an interchangeable ring system that is cut from 6061 Billet Aluminum in 1mm increments from 83mm to 95mm. Both Nozzles come with 2 rings of your choice.
Manual TrimNozzles will come with the hardware to accept the customers manual trim system. (Does not include the lever or cables).
| ITEM | DESCRIPTION |
| PRNYAM55R1 | Manual Trim Nozzle |
Automatic Drop
| ITEM | DESCRIPTION |
| PRNYAM55R2 | Automatic Drop Nozzle |
Nozzles will come with the hardware to accept the customers manual trim system. (Does not include the lever or cables) and come set up to drop automatically while turning.
| ITEM | DESCRIPTION |
| PRNYAM55R3 | Manual Trim with Automatic Drop Nozzle |
Additional Nozzle Rings
May Be purchased
separately. Please specify Aluminum Rings for the GP 1200R Nozzle System. Note:
These rings will only fit the nozzles specifically; they will not interchange
with any other Skat-Trak Nozzles.
| ITEM | DESCRIPTION |
| PRNYRING83 thru PRNYRING95 | Yamaha GP 1200 R Nozzle RIng 83mm thru 95mm |
If you have
feedback or suggestions for our site, please contact our webmaster at:
creative@image-one.com
Yamaha
Replacement Bearing Kits
We offer a full line of Skat-Trak Magnum Pump replacement bearing kits for all
Magnum Pumps. When it comes time to change them out, give us a call and we'll
hook you up with the right parts for your particular craft and configuration.
| ITEM | DESCRIPTION |
| REPLAMSB | Yamaha Set Back Magnum Pump Bearing Replacement Kit |
|
REPLYAMSTD
|
Yamaha Standard Magnum Pump Bearing Replacement Kit |
| REPLYAMSDR | Yamaha 155XL Standard Magnum Pump Bearing Replacement Kit |
Yamaha Billet Aluminum Nose Boots
| ITEM | DESCRIPTION |
| RIMPNOSEBOOTB | Skat-Trak Yamaha 155 XL Impellers and Magnum E-75XL impellers, for Yamaha GP1200R |
|
RIMPNOSEBOOTBS
|
Solas Stock Yamaha 155XL Impellers, for Yamaha GP1200R |
| RIMPNOSEBOOTY4 | Skat-Trak Yamaha 144 Super Slim Line, 144 Slim Line, 155 Super Slim Line |
 |
Skat-Trak Magnum Pumps increase pump pressure over stock pumps by decreasing the inside diameter of the pump and increasing the impeller hub diameter. The added pump pressure gives tremendous acceleration and mid-range speed gains. The Multiple Vane stator section controls the water flow more efficiently, which helps with the hook-up in rough, choppy water. In most cases, you will also see increased top-end speed. |
YAMAHA, E–75XL AND E–75 MAGNUM PUMPS
E-75XL=
155mm o/d, 75mm Hub and 22mm Shaft
E-75 = 155mm o/d and 75mm Hub
The NEW Yamaha Multiple Vane Magnum Pump comes complete with:
A New Yamaha aluminum OEM Stator inserted with our 6, 8, 12, or 14 Vane stainless
steel Stator Section, one Yamaha Magnum Impeller of your choice, and a Billet
aluminum Tail Cone. Please specify watercraft model. Example: Yamaha GP 1200 R.
Housing styles vary and will not work in all crafts. This Pump does not include
Driveshaft, Bearings, and Seals and uses stock Yamaha parts.
We also offer this pump in an EXCHANGE set up; the customer supplies the OEM Yamaha
Stator Section without the Drive Shaft, Bearings, and Seals.
| E–75XL Magnum Pump (155mm in a XL housing) | |
| ITEM | DESCRIPTION |
| PSYAM55/48EXCEXL6 | 6-vane "E-75" XL Magnum Pump 155 Exchange |
|
PSYAM55/48NEWEXL6
|
6-vane "E-75" XL Magnum Pump 155 New |
| PSYXL55/48EXCEXL12 | 12-vane "E-75" XL Magnum Pump 155 Exchange |
| PSYXL55/48NEWEXL12 | 12-vane "E-75" XL Magnum Pump 155 New |
| PSYXL55/48EXCEXL12SB | 12-vane "E-75" XL Mag 155 Exchange Set-Back |
| PSYXL55/48NEWEXL12SB | 12-vane "E-75" XL Mag 155 New Set-Back |
| PSYXL55/48EXCEXL14 | 14-vane "E-75" XL Magnum Pump 155 Exchange |
| PSYXL55/48NEWEXL14 | 14-vane "E-75" XL Magnum Pump 155 New |
| PSYXL55/48EXCEXL14SB | 14-vane "E-75" XL Mag 155 Exchange Set-Back |
| PSYXL55/48NEWEXL14SB | 14-vane "E-75" XL Mag 155 New Set-Back |
| PSYAM55EXCWR | Yamaha OEM 155 XL Wear Ring Mod. Exchange |
| PSYAM55NEWWR | Yamaha OEM 155 XL Wear Ring Mod. New |
| E–75 Magnum Pump (155mm) | |
| ITEM | DESCRIPTION |
| PSYAM55/48EXCE6 | 6-vane "E-75" Magnum Pump 155 Exchange |
|
PSYAM55/48NEWE6
|
6-vane "E-75" Magnum Pump 155 New |
| PSYXL55/48EXCE12 | 12-vane "E-75" Magnum Pump 155 Exchange |
| PSYXL55/48NEWE12 | 12-vane "E-75" Magnum Pump 155 New |
| PSYXL55/48EXCE12SB | 12-vane "E-75" Mag Pump 155 Exchange Set-Back |
| PSYXL55/48NEWE12SB | 12-vane "E-75" Mag Pump 155 New Set-Back |
| PSYXL55/48EXCE14 | 14-vane "E-75" Magnum Pump 155 Exchange |
| PSYXL55/48NEWE14 | 14-vane "E-75" Magnum Pump 155 New |
| PSYXL55/48EXCE14SB | 14-vane "E-75" Mag Pump 155 Exchange Set-Back |
| PSYXL55/48NEWE14SB | 14-vane "E-75" Mag Pump 155 New Set-Back |
| PSYAM55EXCEWR | Yamaha OEM 155 Wear Ring Mod. Exchange |
| PSYAM55NEWEWR | Yamaha OEM 155 Wear Ring Mod. New |
YAMAHA, D–75XL AND D–75 MAGNUM PUMPS
D-75XL=
148mm o/d, 75mm Hub and 22mm Shaft
D-75 = 148mm o/d and 75mm Hub
The NEW Yamaha Multiple Vane Magnum Pump comes complete with:
A
New Yamaha Aluminum OEM Stator inserted with our 6, 8, 12, or 14 Vane stainless
steel Stator Section, an aluminum OEM Wear Ring sleeved with our stainless steel
148mm Wear Ring, one Yamaha Magnum Impeller of your choice, and a Billet aluminum
Tail Cone. Please specify watercraft model. Example: Yamaha GP 1200 R. Housing
styles vary and will not work in all crafts. This Pump does not include Driveshaft,
Bearings, and Seals and uses stock Yamaha parts.
We also offer this pump in an EXCHANGE set up where the customer supplies their
stock Yamaha Stator Section and Wear Ring without the Shaft, Bearings, and Seals.
| D–75XL Magnum Pump (148mm in a XL housing) | |
| ITEM | DESCRIPTION |
| PSYAM55/48EXDXL6 | 6-vane "D-75" XL Mag Pump 155/148 Exc |
|
PSYAM55/48NEWDXL6
|
6-vane "D-75" XL Mag Pump 155/148 New |
| PSYAM55/48EXDXL12 | 12-vane "D-75" XL Mag Pump 155/148 Exc |
| PSYAM55/48NEWDXL12 | 12-vane "D-75" XL Mag Pump 155/148 New |
| PSYAM55/48EXDXL12SB | 12-vane "D-75" XL Mag 155/148 Exc Set-Back |
| PSYAM55/48NEWDXL12SB | 12-vane "D-75" XL Mag 155/148 New Set-Back |
| PSYAM55/48EXDXL14 | 14-vane "D-75" XL Mag Pump 155/148 Exc |
| PSYAM55/48NEWDXL14 | 14-vane "D-75" XL Mag Pump 155/148 New |
| PSYAM55/48EXDXL14SB | 14-vane "D-75" XL Mag 155/148 Exc Set-Back |
| PSYAM55/48NEWDXL14SB | 14-vane "D-75" XL Mag 155/148 New Set-Back |
| D–75 Magnum Pump (148mm) | |
| ITEM | DESCRIPTION |
| PSYAM55/48EXD6 | 6-vane "D-75" Mag Pump 155/148 Exc |
|
PSYAM55/48NEWD6
|
6-vane "D-75" Mag Pump 155/148 New |
| PSYAM55/48EXD12 | 12-vane "D-75" Mag Pump 155/148 Exc |
| PSYAM55/48NEWD12 | 12-vane "D-75" Mag Pump 155/148 New |
| PSYAM55/48EXD12SB | 12-vane "D-75" Mag 155/148 Exc Set-Back |
| PSYAM55/48NEWD12SB | 12-vane "D-75" Mag 155/148 New Set-Back |
YAMAHA, C+–75 MAGNUM PUMPS
C+-75
= 144mm o/d and 75mm Hub
The NEW Yamaha C+-75 Multiple Vane Magnum Pump comes complete with:
A
New Yamaha OEM aluminum Stator inserted with a Skat-Trak 6, 8, 12, or 14 Vane
stainless steel Stator Section, one Yamaha C+-75 Magnum Impeller of your choice,
and Billet aluminum Tail Cone. This pump utilizes the stock Yamaha 144mm Wear
Ring and does not include Driveshaft, Bearings, and Seals and uses stock Yamaha
parts.
We also offer this Pump in an EXCHANGE set up where the customer supplies their
stock Yamaha Stator Section with out the Shaft, Bearings or Seals.
| C+–75 Magnum Pump (144mm) | |
| ITEM | DESCRIPTION |
| PSYAM44EXCC+6 | 6-vane "C+-75" Magnum Pump 144 Exc |
|
PSYAM44NEWC+6
|
6-vane "C+-75" Magnum Pump 144 New |
| PSYAM44EXCC+12 | 12-vane "C+-75" Magnum Pump 144 Exc |
| PSYAM44NEWC+12 | 12-vane "C+-75" Magnum Pump 144 New |
| PSYAM44EXCC+12SB | 12-vane "C+-75" Mag 144 Exc Set-Back |
| PSYAM44NEWC+12SB | 12-vane "C+-75" Mag 144 New Set-Back |
YAMAHA, C–75 MAGNUM PUMP
C-75
= 140mm o/d and 75mm Hub
The NEW Yamaha C-75 Multiple Vane Magnum Pump comes complete with:
A
New Yamaha OEM aluminum Stator and Wear Ring Housing, a 6, 8, 12, or 14 Vane stainless
steel Stator Section, 140mm Wear Ring, one Yamaha C-75 Magnum Impeller of your
choice, and Billet aluminum Tail Cone. This pump does not include Driveshaft,
Bearings, and Seals and uses stock Yamaha parts.
We also offer this Pump in an EXCHANGE set up where the customer supplies their
stock Yamaha Stator Section and Wear Ring without the Driveshaft, Bearings, and
Seals
| C–75 Magnum Pump (140mm) | |
| ITEM | DESCRIPTION |
| PSYAM44/40EXC6 | 6-vane "C-75" Mag Pump 144/140 Exc |
|
PSYAM44/40NEWC6
|
6-vane "C-75" Mag Pump 144/140 New |
| PSYAM44/40EXC12 | 12-vane "C-75" Mag Pump 144/140 Exc |
| PSYAM44/40NEWC12 | 12-vane "C-75" Mag Pump 144/140 New |
| PSYAM44/40EXC12SB | 12-vane "C-75" Mag 144/140 Exc Set-Back |
| PSYAM44/40NEWC12SB | 12-vane "C-75" Mag 144/140 New Set-Back |
If you have
feedback or suggestions for our site, please contact our webmaster at:
creative@image-one.com