Impeller Applications Charts • Magnum Pumps • Specialty Impellers
|
The new Twin Drive technology is here. Skat-Trak introduces its newest innovation in impeller technology for PWC. The main Drive and Inducer impellers will increase the performance of your watercraft weather you have a stock PWC or a full-blown super stock racer. Adding blade surface area to your impeller will increase acceleration performance. Pre loading the inlet with the inducer impeller may increase top speed. The combination of the Twin Drive will give you performance gains across the board. Still the industry leader in PWC impeller and jet pump systems, Skat-Trak is always one step ahead of the competition. Kawasaki Impellers Skat-Trak has specifically designed a full line of impellers to get the most of your Kawasaki PWC. Forged and shapped, by hand, right here in the U.S.A, you will find no better performance product anywhere in the world. Shown below are just a few of our Top-Selling Yamaha performance enhancing creations.
| 
|
click impeller for more info
|
 Ultra 150 |
 750/900 SWIRL |
 750/900 SWIRL |
 1100/1200 SWIRL |
Skat-Trak manufactures impellers for a wide variety of watercraft makes and models beyond those shown above. Please consult the list below for those recommended for your craft.
Stainless Steel Intake Grates NEW 800 SXR NOW AVAILABLE! Our latest stainless steel Scoop Grate for the Kawasaki 800 SXR stand up personal watercraft was redesigned for maximum efficiency and performance. It's made out of Stainless Steel and utilizes the twin scoop, top loader design. The second scoop has been relieved a bit to maintain peak top speed in smooth water conditions. The 750 SXI is good, this one's great! 750 SXI: Bolt this Stainless Steel beauty on your 750 SXI for reliable hook-up day in and day out. Limited to remaining stock, hurry these won't last long! |
 |
| ITEM | DESCRIPTION |
| PRSGKAW800SXR | Kawasaki 800 SXR Scoop Grate — Stainless Steel NEW! |
| PRSGKAW750SXI | Kawasaki 750 SXI Scoop Grate — Stainless Steel |
 |
Fine
Tuning Your Powerhouse The combination of pump, nozzle, and tail cone join to create various pressure and water transfer rates. The tail cone is an often overlooked part of the performance equation. A smaller cone will increase thrust volume giving you more acceleration while a larger one can provide greater pump pressure and top-end speed. |
| ITEM | DESCRIPTION |
| PRTCK/S175 | Kawasaki/Sea-Doo Tail-cone 1.75" |
| PRTCK/S3 | Kawasaki/Sea-Doo Tail-cone 3" |
| PRTCK/S375 | Kawasaki/Sea-Doo Tail-cone 3.75" |
| ITEM | DESCRIPTION |
| PRKAWDSSTXR | Kawasaki STXR Extended Drive Shaft |
| Kawasaki
Replacement Bearing Kits We offer a full line of Skat-Trak Magnum Pump replacement bearing kits for all Magnum Pumps. When it comes time to change them out, give us a call and we'll hook you up with the right parts for your particular craft and configuration. |
 |
| ITEM | DESCRIPTION |
| REPLSDKAW | Kawasaki
Standard Magnum Pump Bearing Replacement Kit Rubber (old style) |
| REPLSDKAWSB | Kawasaki
Set-Back Magnum Pump Bearing Replacement Kit Rubber (old style) |
| REPLSDKAWM | Kawasaki Standard Magnum Pump Bearing Replacement Kit Metal (new style) |
| REPLSDKAWSBM | Kawasaki
Set-Back Magnum Pump Bearing Replacement Kit Metal (new style) |
Our
Ultra 150 Magnum Pumps are designed with either a 148mm or 155mm inside diameter,
eliminating the water starvation problem caused by the stock mixed-flow pump.
For maximum acceration and performance, our Ultra 150 Magnum Pump package includes:
an aluminum Scoop Grate; aluminum Intake Shoe; aluminum Mounting Plate; 6, 8,
12, or 14 Vane stainless steel Stator Section; stainless steel Wear Ring; stainless
steel Impeller of your choice; impeller shaft; sealed ball bearings; seals; a
billet aluminum Tail Cone; aluminum Venturi Nozzle with 2 stainless steel interchangeable
Nozzle Rings; stainless steel Variable Trim Ring; and an aluminum Steering Nozzle
with 2 stainless interchangeable Nozzle Rings.
KAWASAKI ULTRA 150 E–75 & D–75 MAGNUM PUMP
E-75
= 155mm o/d and 75mm Hub
D-75 = 148mm o/d and 75mm Hub
The NEW Kawasaki Ultra 150 Magnum Pump comes complete with:
A new aluminum
Scoop Grate, an aluminum Intake Shoe, an aluminum Pump Mounting Plate, a 6, 8,
12, or 14 Vane stainless steel Stator Section, a stainless steel Wear Ring, one
stainless steel Ultra Magnum Impeller of your choice, Impeller Shaft, Sealed Ball
Bearings, Seals, a Billet aluminum Tail Cone, aluminum Venture Nozzle with 2 Interchangeable
Rings, a stainless steel Variable Trim System Ring, aluminum Steering Nozzle with
2 Interchangeable Rings.
Customer will need to modify the stock Ride Plate to work in conjunction with
this Magnum Pump application.
| KAWASAKI ULTRA 150 MAGNUM PUMP | |
| ITEM | DESCRIPTION |
| PSK150NEWD8 | 8-vane Kaw "D-75" 148 Ultra 150 New |
| PSK150NEWD12 | 12-vane Kaw "D-75" 148 Ultra 150 New |
| PSK150NEWD12SB | 12-vane Kaw "D-75" 148 Ultra 150 New Set Back |
| PSK150NEWD14 | 14-vane Kaw "D-75" 148 Ultra 150 New |
| PSK150NEWD14SB | 14-vane Kaw "D-75" 148 Ultra 150 New Set Back |
| PSK150NEWDWR | Kawasaki "D-75" 148 Wear Ring |
| PSK150ADP48 | Kaw "D-75" 148 Ultra 150 Mounting Plate |
| PSK150NEWE8 | 8-vane Kaw "E-75" 155 Ultra 150 New |
| PSK150NEWE12 | 12-vane Kaw "E-75" 155 Ultra 150 New |
| PSK150NEWE12SB | 12-vane Kaw "E-75" 155 Ultra 150 New Set Back |
| PSK150NEWE14 | 14-vane Kaw "E-75" 155 Ultra 150 New |
| PSK150NEWE14SB | 14-vane Kaw "E-75" 155 Ultra 150 New Set Back |
| PSK150NEWEWR | Kawasaki "E-75" 155 Wear Ring |
| PSK150ADP55 | Kaw "E-75" 155 Ultra 150 Mounting Plate |
| PSK150INTAKE | Kaw Ultra 150 Magnum Intake Shoe |
| PSK150ITRIM | Kaw Ultra 150 Magnum Trim Ring |
| PRSGKAWULTRA | Kawasaki Ultra 150 Magnum Scoop Grate |
| PRNKAW150 | Kawasaki Ultra 150 Venturi Nozzle with 2 rings |
| PRNKAW150S |
Kawasaki Ultra 150 Steering Nozzle with 2 rings |
| SPECIALMAGNUM | Kawasaki Ultra 150 Magnum Impeller Swirl |
KAWASAKI STXR, E–75 MAGNUM PUMP
E-75
= 155mm o/d and 75mm Hub
The NEW Kawasaki E-75 Multiple Vane Magnum Pump will utilize the Ultra 150 Magnum
Pump components. It will come complete with:
Your choice of a new 6, 8, 12, or 14 Vane stainless steel Stator Section, a stainless steel Wear Ring, one stainless steel E-75 Magnum Impeller of your choice, Impeller Shaft, Sealed Ball Bearings, Seals, a Billet aluminum Tail Cone, aluminum Venture Nozzle with 2 Interchangeable Rings, a stainless steel Variable Trim System Rings, aluminum Steering Nozzle with 2 Interchangeable Rings.
KAWASAKI, D–75 MAGNUM PUMP
D-75
= 148mm o/d and 75mm Hub
The NEW Kawasaki D-75 Multiple Vane Magnum Pump comes complete with:
A New Kawasaki aluminum OEM Pump Housing, a 6, 8, 12, or 14 Vane stainless steel Stator Section and Wear Ring, one Kawasaki D-75 Magnum Impeller of your choice, Impeller Shaft, Bearings, Seals, and a Billet aluminum Tail Cone.
We also offer these Pumps in an EXCHANGE set up; the customer supplies the OEM Kawasaki Pump Housing for modification.
| D–75 Magnum Pump (FOR USE ON STX/STXR/ZXI MODELS) | |
| ITEM | DESCRIPTION |
| PSKAWMAGEXD6 | 6-vane Kaw "D-75" 148 STX/ZXI Magnum Pump Exc |
| PSKAWMAGNEWD6 | 6-vane Kaw "D-75" 148 STX/ZXI Magnum Pump New |
| PSKAWMAGEXD8 | 8-vane Kaw "D-75" 148 STX/ZXI Magnum Pump Exc |
| PSKAWMAGNEWD8 | 8-vane Kaw "D-75" 148 STX/ZXI Magnum Pump New |
| PSKAWMAGEXD12 | 12-vane Kaw "D-75" 148 STX/ZXI Magnum Pump Exc |
| PSKAWMAGNEWD12 | 12-vane Kaw "D-75" 148 STX/ZXI Magnum Pump New |
| PSKAWMAGEXD12SB | 12-vane Kaw "D-75" 148 STX/ZXI Mag Exc Set-Back |
| PSKAWMAGNEWD12SB | 12-vane Kaw "D-75" 148 STX/ZXI Mag New Set-Back |
KAWASAKI, C–75 MAGNUM PUMP
C-75
= 140mm o/d and 75mm Hub
The NEW Kawasaki C-75 Multiple Vane Magnum Pump comes complete with:
A New Reinforced Kawasaki aluminum OEM Pump Housing, a 6, 8, or 12 Vane stainless steel Stator Section, one Kawasaki C-75 Magnum Impeller of your choice, Impeller Shaft, Bearings, Seals, and a Billet aluminum Tail Cone. Please specify ZXI or SXI watercraft, Pump Housing styles vary.
We also offer this Pump in an EXCHANGE set up; the customer supplies the OEM Kawasaki Pump Housing for modification.
| C–75 Magnum Pump ZXI (FOR USE ON 750/900 ZXI MODELS) | |
| ITEM | DESCRIPTION |
| PSKAWZXIMAGEXC6 | 6-vane "C-75" ZXI Magnum Pump Exchange |
| PSKAWZXIMAGNEWC6 | 6-vane "C-75" ZXI Magnum Pump New |
| PSKAWZXIMAGEXC12 | 12-vane "C-75" ZXI Magnum Pump Exchange |
| PSKAWZXIMAGNEWC12 | 12-vane "C-75" ZXI Magnum Pump New |
| PSKAWZXIMAGEXC12S | 12-vane "C-75" ZXI Magnum Pump Exchange Set-Back |
| PSKAWZXIMAGNEWC12S | 12-vane "C-75" ZXI Magnum Pump New Set-Back |
| C–75 Magnum Pump SXI (FOR USE ON SXI/SX/XI MODELS) | |
| ITEM | DESCRIPTION |
| PSKAWSXIMAGEXC6 | 6-vane "C-75" 750 SXI Magnum Pump Exchange |
| PSKAWSXIMAGNEWC6 | 6-vane "C-75" 750 SXI Magnum Pump New |
| PSKAWSXIMAGEXC12 | 12-vane "C-75" 750 SXI Magnum Pump Exchange |
| PSKAWSXIMAGNEWC12 | 12-vane "C-75" 750 SXI Magnum Pump New |
| PSKAWSXIMAGEXC12S | 12-vane "C-75" 750 SXI Magnum Pump Exc Set-Back |
| PSKAWSXIMAGNEWC12S | 12-vane "C-75" 750 SXI Mag Pump New Set-Back |
If you have
feedback or suggestions for our site, please contact our webmaster at:
creative@image-one.com